Component Compatibility Guide Nfortec

Today we bring you the holy grail of guides, the guide to rule them all, finally, a compatibility guide between our products, so you can choose knowing with certainty which product will perform at its best in each of our towers

Making a configuration from scratch with our products has never been so easy. Simply choose your tower model, if you already have yours, and check which components are compatible from the entire catalog of Nfortec. In addition, if you are thinking of renewing your tower, you can check at a glance all the components that you could install in it, something very useful if you are thinking of upgrading your configuration

How to interpret the guide

The guide is structured so that you can easily find out which heatsinks, liquid coolers, fans and power supplies could work in each tower model. Not only which ones would be compatible in terms of connections, but which of those with lighting would be synchronizable, i.e. allow you to unify the lighting of all your compatible components. If the product is compatible and synchronizable, it will be marked by a colored icon. If it is only compatible, but does not have lighting, the icon will be a circle with a green check. Products that are compatible but do not have a choice of illumination, such as Hydrus RED / Blue that only illuminate in red or blue respectively, and operate in automatic mode, will be marked by a blue circle. If the product requires a controller to control the lighting, and the chosen tower does not have a controller, a red circle will indicate this

Options for all

You will see that the incompatibilities occur mainly with the supplementary fans. This is because there are specific fans for some of our gaming case models, which may work in other towers but not in all of them, due to their exclusive design or wiring. To offer you more generic fans, in the additional fans section, you will find Velorum, Nebulus and Oberon, with different connections, depending on your needs

With respect to those fans or cooling that require a controller (red dot) this is because the tower in which you want to install them, does not have it. But, you can purchase an individual controller on our website, always confirming that the connections are those of the fans you want, and install it on your tower. Of course, if you want to synchronize the lighting of all fans, you will have to put them all to match, ie the same connections

As for the power supplies, they are all compatible with any of our cases but, it is important to note that the Vanth, Scutum X and Scutum Semimod models do not have RGB lighting, while Sagitta does

You can find all the details, measurements and connections on the page of each product, but with this table you will surely have no doubts about the compatibility between all of them