Increase the ventilation of your CPU with our Aircooler Upgrade

If you have a cPU heatsink of Nfortec and you want to double its cooling power, now you can, without the need to invest in a whole new one. Upgrade and improve the cooling of your heatsink Nfortec, with our Aircooler Upgrade Kit

Discover the Aircooler Upgrade set

Now you can to install a second fan without any problem on any of your compatible heatsinks Nfortec Candle X, , Centaurus X o Aegir. Choose the fan that goes with your heatsink, and install it easily, with this set, prepared with everything you need

• Fans compatible with installation clips: 120mm
• Y cable connection: 4-pin PWM

Product content:

• 2x 120mm Clips
• 1x PWM Y-cable

Upgrade your heatsink and multiply its cooling power

If you decided to install a cPU cooler from among the Vela X, Centaurus X or Aegir models, and you have fallen short, you do not need to purchase their dual fan versions, as they are ready for you to install an extra one easily. The way to do it is very simple. You can choose any of the fans compatible with these cooling systems, from the following ones 120mm fans available on our website, although, for example, Aegir has a specific one, but you could install another one without any problem

Actually, you can choose any fan from our section of supplementary fans, that is 120mm, even for Aegir. The specific model is simply for aesthetic reasons, so that both fans of your heatsink are the same. If you have a CentaurusX, the most suitable will be Nebulus, the same type of wiring and also ARGB, as in the case of the pre-installed fan. And, in the case of Candle X, , Aegir Fan is what you are looking for

Add an additional 120mm fan

As we said, in principle you would have no problem installing any other 120mm fan from our catalog, but we recommend that you always take into account the specifications of your heatsink, and the additional fan you want to install

Once you have chosen it, mounting on your heatsink is done exactly the same as when you installed the original fan that came with your Aegir, Vela X or Centaurus X. You attach the retaining clips, and the PWM cable in Y, to power both fans so you don't have to connect a second cable to your board and you're done!

At Nfortec we always give you the best options for your equipment, and we look forward to helping you with this simple fan upgrade for your CPU cooler