copy of Nfortec NERVIA Black

Nervia Gaming Tower

Nervia enters the catalog of Nfortec by the big door. With a 3D geometric front design, lighting touches to give it that gaming detail, and innovative component installation options. It has three pre-installed fans with PWM function that you can manage to optimize the airflow, its rear bay, with PCI slots, is rotatable, for a vertical installation of the graphics card, and is fully compatible with full ARGB installations. Nervia is much more than an ATX gaming tower.

100% secure payments

3D geometric design

Nervia enters the catalog of Nfortec through the front door. With a 3D geometric front design, lighting touches to give it that gaming detail, and innovative component installation options. It has three pre-installed fans, its rear bay, with PCI slots, is rotatable, for a vertical installation of the graphics card, and is fully compatible with full ARGB installations. Nervia is much more than an ATX gaming tower.

ATX tower loaded with features

The first thing that will attract you to Nervia, will undoubtedly be its front design, but Nervia is not only an elegant gaming tower, its features will make you fall in love with it. Its front design is meshed to ensure good airflow, making the most of its 3 included fans with PWM function along with the additional cooling you install on it. Nervia is compatible with ATX, MicroATX, ITX and even the large Extended-ATX motherboards, so you can configure your PC the way you really want.

Cooling to your liking

The Nervia gaming tower comes equipped with three pre-installed fans, two front and one rear, all with PWM function designed to give maximum performance and allowing you to calibrate the power curves to optimize airflow at any time, leaving in the background the lighting, but is fully compatible with additional cooling and ventilation ARGB. You can install CPU liquid coolers up to 360mm at the front and up to 280mm at the top, or up to six fans in total. Combine the options as best suits your configuration, and maintain an optimal temperature for your components

Epic installation options

This gaming tower is designed so that you can install and configure your components easily and cleanly, thanks to its cable management bridge, and enjoy them through its tempered glass side panel. One of its key features is that the rear bay, where the PCI slots are located, is rotatable, so you can install, if desired, the graphics card vertically and you can make the most of the interior of Nervia.

Details that stand out

Nervia is the perfect gaming tower for those looking for a more discreet PC case in terms of lighting, but with all the details that make it perfect for infinite configurations, including the possibility of upgrading to full ARGB. It has the necessary connections for your usual peripherals, 2 USB 2.0 ports and one 3.0, plus microphone and headphone connection, and the LED button to control the lighting details of its front.

MODEL	NERVIA
DIMENSIONS (L x W x H)	430mm x 210mm x 465mm
WEIGHT	6,6Kg
MATERIAL	0.6mm SPCC steel, tempered glass
FAN LOCATIONS	Front: 3x 120mm (2x included)
	Rear: 1x 120mm (1x included)
	Top: 2x 120mm 2x 140mm
LIQUID COOLING	Front: Radiator up to 360mm
	Upper: Radiator up to 280mm
	Rear: Radiator up to 120mm
DISK BAYS	2x 2.5" + 2x 3.5"/2.5" + 2x 3.5"/2.5"
EXPANSION SLOTS	x7 Rotatable to vertical
FRONT I/O	USB 2.0 x2
	USB 3.0 x1
	Headset/Microphone x1
	On/Off
	Reset/LED
	LED
DUST FILTERS	1x Superior
DUST FILTERS	1x Lower
MOTHERBOARD TYPE	ATX, MicroATX, ITX, Extended-ATX
POWER SUPPLY	ATX format up to 180mm (not included) placed in the bottom part
GRAPHICS CARD (GPU)	Up to 360mm (not included)
CPU DISSIPATOR	Up to 170mm (not included)
CABLE MANAGEMENT	24mm
FAN SPECIFICATIONS
Dimensions	120mm x 120mm x 25mm
PWM	Yes
Maximum speed (RPM)	800 - 1500 RPM ± 10%
Air flow rate (airflow)	59.31 CFM, Min:51.40CFM
Static pressure	1.33mm H2O ± 10%
Noise generated	28.63 dB(A)±10%
Bearing type	Hydraulic Bearings
Estimated useful life	40.000 h @ 25Cº
Voltage	12V 0.18A ±10% 12V 0.18A ±10% 12V 0.18A ±10
Connectors	12v 4pin (PWM) Male + Female

Title Aliexpress: Nfortec Nervia - Gaming Computer Case Compatible ATX, Mini-ATX and ITX Boards, 3 PWM Fans Included, RGB Mesh Front, Dust Filters, Tempered Glass Side Panel, USB 3.0, Black
Supported motherboard size: ATX
ITX
MicroATX
Maximum length Graphics card: 360mm
Maximum height Air cooling: 170mm
Expansion slots: 7
RGB controller included: No
Fans included: 3
Synchronization to motherboard 3pin 5v: Yes
Front Liquid Cooling: 120mm
240mm
360mm
Rear Liquid Cooling: 120mm
Superior Liquid Cooling: 120mm
240mm

Brand Nfortec

Reference 100560

No reviews