Draco V2: the best ventilation for your equipment

Today we bring you a tower that needs no introduction, Draco V2, a classic of Nfortec since our first version of this PC case was released. For today's post we bring you an in-depth review of this well-deserved top seller from Nfortec.

The front end that captivated you

What stands out the most, at first glance, of our tower Draco V2 is its eye-catching design, with its characteristic front illuminated by its three RGB fans. In addition to being very striking, thanks to its mesh filter we will get a very powerful ventilation that will leave your components working in optimal conditions. The last fan included in Draco V2 is installed at the rear to finish expelling the hot air that accumulates inside our PC case.

Light up your set-up

One of the most striking improvements that we introduced in Draco V2 was a new and improved backlighting system for its front and rear RGB fans, adding new colors and effects among which we can highlight the popular "Rainbow" effect. Just like its predecessor, the gaming case Draco V2 case incorporates a controller in which to install all its fans and to control the RGB lighting from its remote control or from the LED button on its front.

Command post

One of the big differences of the Draco V2 gaming tower with respect to many competitors is all the options it offers from its front and from here we will find the typical buttons to turn on or reset our equipment and the pair of jacks for audio and microphone. Where comes the differentiating point is in its USB connectors, Draco V2 has two USB 2.0, another 3.0 and the USB type C connector very uncommon in the front of the gaming towers.

White Edition

Earlier this summer we did something you have been asking for a long time, the Draco V2 White Edition. A revision of the traditional model with the chassis completely in white and black touches, keeping the rest of the features of the Black Edition.

In detail

The new Draco V2 maintains compatibility with all available motherboard formats, from large E-ATX to Micro ATX and Mini ITX thanks to its 454x205x439 dimensions. Following our line, Draco V2 has the 7 expansion slots and capacity for liquid cooling up to 240mm both on the front and on the top and liquid cooling up to 120mm on the rear. It also includes two 3.5'' and three 2.5'' bays for your HDD and SSD.

Care in every component

As aspects that we consider basic in any tower Draco V2 has a fairing at the bottom to hide the power supply and all wiring getting a clean and cable-free installation. For this occasion we have divided it and the hard drives have their own space. Finally we have incorporated to its four legs some foam strips to achieve greater stability.