Nfortec DYS White Gaming Tower

Gaming Tower

The new gamer tower Nfortec Dys comes ready to conquer your set-up, with its elegant design and its mesh front, which will make your components are perfectly ventilated. With ARGB technology so you can synchronize other components, and control the lighting from the front. Choose Dys in black or white color, and give it that avant-garde touch that your set-up is asking for.

Color

100% secure payments

Fully functional design

Our new Dys gaming tower is made of high quality materials, and its chassis, made of steel, will protect your components over time. Its front mesh with 3D design not only makes it an elegant tower, but also influences its good ventilation. It has two anti-dust filters, one lower and one upper, the latter being magnetic, facilitating the cleaning and maintenance of your tower. It could not miss its hinged tempered glass side, so that your components shine inside, and any modification task is easy. Choose between the Dys models in white or black, and show off your set-up.

Maximum compatibility with ARGB technology

Dys is compatible with ARGB technology, and has a 5v 3-pin connector, to synchronize its lighting with other ARGB components, through your motherboard or controller. It has three fans with ARGB lighting, two on the front and one on the back, already installed as standard. Control the lighting in a simple and convenient way, from the button available on the front panel, and choose from the 15 available modes the one that best suits your set-up.

Spacious and with everything close at hand

The dimensions of our Dys tower, 340mm x 205mm x 412mm, make it large enough to install your favorite components, and at the same time, be perfect in any space. It is compatible with MicroATX and ITX boards, so that you have the maximum power in the minimum space. Inside you can place graphics cards up to 340mm or Cooler with maximum height of 160mm. Its lower independent bay has capacity for power supplies up to 180mm and has 4 expansion slots. On the front you will find the connections for your main peripherals, as well as the lighting control button and the power button. Enjoy sound through speakers or headphones, thanks to the 3.5mm HD jack, and conveniently connect your peripherals to its two USB 2.0 ports, and its USB 3.0 port.

Prepared for high ventilation

In addition to the 3 fans that already comes as standard, Dys allows to place more cooling components. It accepts a total of 6 fans, being possible to place 3 120 mm on the front or two 140 mm; on the top it has space for 2 120 mm or two 140 mm, and finally, one 120 mm on its rear. The included fans, two front and one rear, will create a great airflow to keep your components cooled, expelling all the hot air they generate.

MODEL	DYS WHITE
DIMENSIONS (L x W x H)	340mm x 205mm x 412mm
WEIGHT	4,9Kg
MATERIAL	0.6mm SPCC steel, tempered glass
FAN LOCATIONS	Front end: 3x 120mm (2x RGB included) 2x 140mm
	Rear: 1x 120mm (1x RGB included)
	Upper part: 2x 120mm 2x 240mm
EXPANSION SLOTS	x4
FRONT I/O	USB 3.0 x1
	USB 2.0 x2
	Headset/Microphone x1
	On/Off
	LED RGB Control
DUST FILTERS	1x Upper part (Magnetic)
DUST FILTERS	1x Lower part
MOTHERBOARD TYPE	MicroATX, ITX
POWER SUPPLY	ATX format up to 180mm (not included) placed in the bottom part
GRAPHICS CARD (GPU)	Up to 330mm (not included)
CPU DISSIPATOR	Up to 160mm (not included)

Title Aliexpress: Nfortec DYS White Gaming Tower
Supported motherboard size: ITX
MicroATX
Maximum length Graphics card: 330mm
Maximum height Air cooling: 160mm
Expansion slots: 4
RGB controller included: No
Fans included: 3
Synchronization to motherboard 3pin 5v: Yes
Front Liquid Cooling: 120mm
240mm
Rear Liquid Cooling: 120mm
Superior Liquid Cooling: 120mm
240mm

Brand Nfortec

Reference NF-CS-DYS-W

MODEL	DYS
DIMENSIONS (L x W x H)	340mm x 205mm x 412mm
WEIGHT	4,9Kg
MATERIAL	0.6mm SPCC steel, tempered glass
FAN LOCATION	Front: 3x 120mm (2x RGB included) 2x 140mm
	Rear: 1x 120mm (1x RGB included)
	Top side: 2x 120mm 2x 240mm
EXPANSION SLOTS	x4
FRONT I/O	USB 3.0 x1
	USB 2.0 x2
	Headphone/Microphone x1
	Power On/Off
	RGB LED Control
DUST FILTERS	1x Top (Magnetic)
DUST FILTERS	1x Bottom
MOTHERBOARD TYPE	MicroATX, ITX
POWER SUPPLY	ATX format up to 180mm (not included) placed on bottom side
GRAPHICS CARD (GPU)	Up to 330mm (not included)
CPU DISSIPATOR	Up to 160mm (not included)

No reviews

Fully functional design

Maximum compatibility with ARGB technology

Dys is compatible with ARGB technology, and has a 5v 3-pin connector, so you can synchronize its lighting with other ARGB components, through your motherboard or controller. It has three fans with ARGB lighting, two on the front and one on the back, already installed as standard. Control the lighting in a simple and convenient way, from the button available on the front panel, and choose from the 15 available modes the one that best suits your set-up

Spacious and with everything at hand

Prepared for great ventilation

In addition to the 3 fans that already comes as standard, Dys allows to place more cooling components. It accepts a total of 6 fans, being possible to place 3 120mm on the front or two 140mm; on the top it has space for 2 120mm or two 140mm, and finally, one 120mm on its rear. The included fans, two front and one rear, will create a great airflow to keep your components cooled, expelling all the hot air they generate